User manual

207
Monitor and manage Digi devices
Monitor/manage Mesh networks from Connectware Manager
Digi’s Connectware Manager provides remote network management of all connected
hardware, including devices on the ZigBee network. In contrast to the one-user-to-one
device model of other Digi device interfaces, Connectware Manager deploys a one-user-
to-many-devices interface model. From Connectware Manager, you can provision and
configure network hardware, track device performance, remotely set filters and alarms,
monitor connections, reboot devices and reset defaults, and remotely upgrade firmware.
ZigBee extensions to Connectware Manager make it a particularly attractive platform for
managing ZigBee devices behind the gateway. It displays all nodes on the ZigBee network
with the ability to query for node profiles, node descriptors, connected endpoints, radio
configuration settings radio statistics, bindings, and more.
Several views in Connectware Manager are used for viewing and configuring ZigBee
networks:
 ZigBee Networks View
 Node View
See "Configuring Mesh Networks and Nodes through Connectware Manager" on page
170 for examples of these views.