User manual

Appendix F 127
Class 2 FAX Responses
+FCFR Indicate Confirmation to Receive.
Syntax: +FCFR
Usage: Indicates the reception of an acceptable TCF training burst and valid DCS signal from the remote
machine.
+FCON Facsimile Connection Response.
Syntax: +FCON
Usage: Indicates connection with a FAX machine. Generated in response to an originate command or
answer command.
+FCSI Reports the Remote ID.
Syntax: +FCSI:”<CSI ID string>”
Usage: Reports the Called Station’s ID.
+FDCS Reports DCS Frame Information.
Syntax: +FDCS:VR,BR,WD,LN,DF,EC,BF,ST
Usage: Reports negotiated parameters for the current session. The subparameters are described in the
+FDCS command description.
+FDIS Reports DIS Frame Information.
Syntax: +FDIS:VR,BR,WD,LN,DF,EC,BF,ST
Usage: Reports remote FAX capabilities and intentions. The subparameters are described in the +FDCS
command description.
+FET Post Page Message Response.
Syntax: +FET:<ppm>
Usage: Generated by the receiving modem after the end of Phase C reception, on receipt of the post-page
message from the transmitting station. The <ppm> codes are described in the +FET command
description.
+FHNG Call Termination with Status.
Syntax: +FHNG:<hangup status code>
Usage: Indicates that the call has been terminated. The <hang-up status code> values are described in the
+FAXERR command description.
+FPTS Receive/Transmit Page Transfer Status.
Syntax: +FPTS:<ppr>
Usage: Reports a <ppr> number representing the copy quality and related post-page message. The valid
<ppr> values are defined in the +FPTS command description.
+FTSI Report the Remote ID.
Syntax: +FTSI:"<TSI ID string>"
Usage: Reports the transmitting station’s ID.