User manual

Appendix F 119
Table 9 Supported FAX Transmit/Receive Modulations
n
Modulation Speed (Bits/Second)
3
V.21 ch. 2 300
24
V.27terbo 2400
48
V.27terbo 4800
72
V.29 7200
73
V.17LT 7200
74
V.17ST 7200
92
V.17terbo 192 LT 19200
93
V.17terbo 192 ST 19200
96
V.29 9600
97
V.17LT 9600
98
V.17ST 9600
121
V.17LT 12000
122
V.17ST 12000
145
V.17LT 14400
146
V.17ST 14400
+FRM=
?
FAX Normal Mode Receive Capabilities
Causes the modem to output the receive modulations supported by the modem. See Table 9.
+FRM=
n
Modem Accept Training
Causes the modem to accept training with
n
type modulation and the protocol is normal mode. Table 9
shows the values you can enter for this command and the meaning of those values.
Returns CONNECT or 1 to DTE after carrier is detected.
+FTH=
?
FAX SDLC Mode Transmit Capabilities
Causes the modem to output the FAX SDLC transmit capabilities supported by +FTM=?. See Table 9.
+FTH=
n
Modem Initiate Training (SDLC)
Causes the modem to initiate training with
n
type modulation and the protocol is SDLC mode. Table 9
shows the values you can enter for this command and the meaning of those values.
Returns CONNECT or 1 to DTE after carrier is detected.
+FRH=
?
FAX SDLC Mode Receive Capabilities
Causes the modem to output the FAX SDLC receive capabilities supported by +FTM=?. See Table 9.
+FRH=
n
Modem Accept Training (SDLC)
Causes the modem to accept training with
n
type modulation and the protocol is SDLC mode. Table 9
shows the values you can enter for this command and the meaning of those values.
Returns CONNECT or 1 to DTE after carrier is detected.