User manual

56 Chapter 7 Special Features: Modem Emulation
S37
General Bit Mapped Options Status
Telnet support for modem emulation.
Default:0
Bit 0-1 Send TCP transmit data timer
0 = 100ms
1 = 200 ms
2 = 300 ms
3 = 500 ms
Bits 2-3 Service TCP transmit data watermark
0 = 256
1 = 512
2 =768
3 =1024
Bits 4-5 Service TCP receive data watermark
0 = 256
1 = 512
2 =768
3 =1024
Bits 6-7 Telnet support (RFC 2217)
0 = Disabled
1 = Receive Telnet support enabled
2 = Transmit Telnet support enabled
3 = Receive and Transmit Telnet support
enabled
--*0
S38 Accepted but ignored. 0-255 s 20
S39
Flow Control Bit Mapped Options Status
Default:3 (00000011b)
Bits 0-2Status of command options
0 =No flow control
3 =RTS/CTS (&K3) (Default.)
4 =XON/XOFF (&K4)
5 =Transparent XON (&K5)
6 =Both methods (&K6)
Bits 3-7Reserved
--*3
S40 Accepted but ignored. - - *
104
(68h)
S41 Accepted but ignored. - - *
195
(C3h)
S42 - S45 Reserved - - -
S46 Accepted but ignored. - - * 138
S48 Accepted but ignored. - - * 7
S82 Accepted but ignored. - -
128(40h)
S86 Accepted but ignored. 0-255 - -
Register Function Range Units Saved Default