User manual

30 Chapter 3 Configuration
4. Select the Ports to manage or the Autoconnect function if needed and
click Next.
5. Review settings and click Finish.
The Advanced tab under User allows you to set Escape characters for
Connect, Telnet, Rlogin, and Kill as well as an SSH Public Key. Click Apply
to save the settings.
6. Click Reboot for changes to take effect.
Security Configuration
Security settings allow the administrator to set passwords, security levels,
and authentication via RADIUS server.Some services, such as Telnet and
Rlogin, can be disabled for inbound users. This means that the users
cannot access the Digi device using those services. This feature allows
you to turn off individual services or to specify a security level, which
means that all services not included in that level are turned off. The
following services can be turned off.
• HTTP
• RealPort
•Reverse TCP
• Reverse Telnet
• Remote login
• Remote shell
•SNMP
•SSH
• Telnet
Procedure
1. Click Security > and enter a new password for the root administrator.
2. Enter the confirmation password and click Apply.
3. Click Network Security and select the security level appropriate to your
environment and click Apply.
Note: Secure Access Levels -
Secure: SSH is the only service available to inbound users.
High: SSH, HTTP, SNMP, and RealPort services are available to inbound