User manual

Chapter 3 Configuration 23
Note: The serial parameters for two connecting devices must match meaning if one
device is set for 9600 bps, the other device must be set for the same rate.
Serial Bridging
A serial bridge is a network connection between two serial devices, each of
which uses a device server. The serial devices “think” they are
communicating with each other across a serial cable using serial
communication techniques. There is no need to reconfigure the server or
the serial device. Neither is aware of the intervening network.
This profile configures each side of the bridge separately. Repeat the
configuration for the second Digi device server of the bridge specifying the
IP address of the first Digi device server.