User manual

rlogin

66 Chapter 2 Command Descriptions

rlogin

Devices

supported

This command is supported in Digi Connect Family and Digi Cellular

Family products only. Not supported in ConnectPort Display.

Purpose Performs a login to a remote system, also referred to as an rlogin.

Required

permissions

For Digi Connect products with two or more users, permissions must be set

to “set permissions rlogin=execute” to use this command. See

"set permissions" on page 157 for details on setting user permissions for

commands.

Syntax rlogin [esc=(char)] [{user=user name|-l user name}]

[ip address]

Options esc

A different escape character than the ~ (tilde) character, which will be

used for the current Rlogin session. This character is used for

suspending a session from the remote host to return to the device server

command line.

user=user name | -l user name

The user name to use on the remote system. If you do not specify a

name, your device server user name will be used. The “-l user-name”

option is for compatibility with the UNIX “rlogin” command.

ip address

The IP address of the system to which you are performing the remote

Examples

#> rlogin 10.0.0.1