User manual
revert
Chapter 2 Command Descriptions 65
command.
udpserial [port=range]
Reverts the UDP serial settings configured by the “set udpserial”
command.
user
Reverts the user settings configured by the “set user” command.
video
Reverts the video settings configured by the “set video” command.
vncclient [port=range]
Reverts the settings configured by the “set vncclient” command.
vpn {all|global|tunnel|phase1|phase2}
Reverts the Virtual Private Network (VPN) settings configured by the
“set vpn” command. Keyword options allow for reverting all or selected
VPN settings. See "set vpn" on page 228 for descriptions of the settings.
all
Reverts all VPN settings.
global
Reverts global VPN options.
tunnel
Reverts VPN tunnel settings.
phase1
Reverts Internet Key Exchange (IKE)/Internet Security Association
and Key Management Protocol (ISAKMP) Security Association (SA)
Phase 1 options.
phase2
Reverts IKE/ISAKMP SA Phase 2 options.
wireless
Reverts the wireless settings configured by the “set wlan” command.
Example
Reset a device’s serial setting
The device serial setting is reset to the default serial configuration.
#> revert serial
Reset a serial port to default settings
#> revert serial port=2
See also • "boot" on page 19.
• The various “set” commands referenced in this description.
• "show" on page 249.