User manual

revert
64 Chapter 2 Command Descriptions
pmodem [port=range]
Reverts the modem emulation settings, configured by the “set pmodem”
command.
pppoutbound [port=range]
Reverts the Point-to-Point Protocol (PPP) outbound connection settings,
configured by the “set pppoutbound” command.
profile [port=range]
Reverts the profile settings configured by the “set profile” command.
putty
Reverts the terminal emulation settings configured by the “set putty”
command.
python
Reverts the Python program settings configured by the "set_python"
command.
rciserial
Reverts the RCI serial settings configured by the “set rciserial” command.
realport
Reverts the Realport settings configured by the “set realport” command.
rtstoggle
Reverts the RTS toggle settings configured by the “set rtstoggle”
command.
serial [port=range]
Reverts the serial settings configured by the “set serial” command.
service
Reverts the service settings configured by the “set service” command.
snmp
Reverts the SNMP settings configured by the “set snmp” command.
socket_tunnel
Reverts the socket tunnel settings configured by the “set socket_tunnel”
command.
surelink
Reverts the Digi SureLink™ settings configured by the “set surelink”
command.
switches
Reverts the Multiple Electrical Interface (MEI) switch settings configured
by the "set switches" command.
system
Reverts the system settings configured by the “set system” command.
tcpserial [port=range]
Reverts the TCP serial settings configured by the “set tcpserial”
command.
term [port=range]
Reverts the terminal connection settings configured by the “set term”