User manual

vpn
Chapter 2 Command Descriptions 257
Enable a VPN tunnel
This command enables the tunnel at index 1 to be used.
#> vpn connect index=1
See also • "display" on page 27. The “display sadb,” “display sp,” and “display vpn”
commands display VPN-related connection and status information.
• "revert" on page 61. The “revert vpn” options revert groups of VPN
settings, or all VPN settings.
• "set vpn" on page 228. The “set vpn” command configures VPN
settings.
• The VPN settings in the Web user interface (Network > Virtual Private
Network (VPN) Settings) and the online help for these settings.
• The Connections Management page in the Web user interface (from
the Home page, click the Connections link) is the Web equivalent of
this command.
• The Digi Cellular Family User’s Guide section titled “Virtual Private
Network (VPN) Settings.”