User manual

status

254 Chapter 2 Command Descriptions

status

Devices

supported

This command is supported in all Digi Connect products.

Purpose Displays the current list of sessions. The “status” command displays the

status of outgoing connections (connections made by “connect,” “rlogin,” or

“telnet” commands). In contrast, the “display” command displays real-time

information about a device, while the “info” command displays statistical

information about a device over time. Typically, the “status” command is

used to determine which sessions to close.

Required

permissions

For Digi Connect products with two or more users, permissions must be set

to “set permissions status=read” or “set permissions status=rw” to use this

command. See "set permissions" on page 157 for details on setting user

permissions for commands.

Syntax status [range] [session number]

Options range

The range of sessions to view.

session number

An index number identifying the session number to view.

Examples #> status

Connection: 3 From: 10.8.109.8

Connection not associated with any sessions.