User manual

show
Chapter 2 Command Descriptions 251
route The IP routing table.
This command is not
associated with a “set”
command.
No No
rtstoggle set rtstoggle Yes No
serial set serial Yes No
service set service No Yes
snmp set snmp No No
socket_tunnel set socket_tunnel No No
surelink set surelink
system set system No No
tcpserial set tcpserial Yes No
term set term
udpserial set udpserial Yes Yes
(when
specifying
UDP serial
destinations)
user set user No Yes
versions This command shows
firmware version
information. It is not
associated with a “set”
command.
No No
video set video No No
vncclient set vncclient No No
vpn set vpn No No
wlan set wlan
This option displays an
evaluation of saved
wireless settings,
including ineffective
settings and a list of
valid combinations. It
displays whether
encryption methods
are specified and in
use or not used by
authentication
methods, and whether
setup of certain options
appear to be complete
(see Examples).
No No
Option
Displays settings
configured by
Works w/
port option
Works w/
range
option