User manual

set video
Chapter 2 Command Descriptions 225
set video
Devices
supported
This command is supported in ConnectPort Display only.
Purpose Configures or displays video settings for ConnectPort Display.
Syntax Configure video settings
set video mode={640x480@60-16|800x600@56-16|800x600@60-16|
1024x768@70-8}
splash_time=0-30 seconds
Display current video settings
set video
Options mode={640x480@60-16|800x600@56-16|800x600@60-16|
1024x768@70-8}
The resolution, refresh rate, and color depth of the display screen.
splash_time=0-30 seconds
The amount of time, in seconds, to show the splash screen. Valid values
are 0 through 30. A value of 0 disables the splash screen.
Example #> set video mode=800x600@60-16 splash_time=5
See also • "revert" on page 61.
• "set putty" on page 175.
• "set vncclient" on page 226.
• "show" on page 249.