User manual

set user
222 Chapter 2 Command Descriptions
name= string
Specifies the name of the user to be acted on.
newname=string
Specifies a new user name.
gid=number
Specifies the identifier for the group being associated with a user. If
omitted, the “gname” option must be specified.
gname=string
Specifies the name of the group being associated with a user. If omitted,
the “gid” option must be specified.
commandline={on|off}
Specifies whether the user is allowed to access the command line of the
device.
on
User can access the command line interface.
off
User can not access the command line interface.
The default is “on.”
groupaccess={on|off}
Specifies whether the user is allowed to use the access rights for any
associated groups. This allows a group to define the access rights for
users. For instance, if the user has “commandline=off” and an associated
group has “commandline=on,” then the user will have command line
access if “groupaccess=on.”
on
The user can use group access rights.
off
The user cannot use group access rights.
The default is “off.”
menu={none|index|name}
Specifies whether the user is allowed to access the custom menu
interface of the device and defines the custom menu that the user will
have displayed.
none
The user is not allowed to access the custom menu interface.
index
The user is allowed to access the custom menu interface and will be
displayed the custom menu at the specified index.
name
User is allowed to access the custom menu interface and will be
displayed the custom menu using the specified name.
The default is “none.”