User manual

set system
Chapter 2 Command Descriptions 211
set system
Devices
supported
This command is supported in all Digi Connect products.
Purpose Configures and displays system-identifying information, such as a
description of the device, its location, and a contact person.
Required
permissions
For Digi Connect products with two or more users, permissions must be set
to “set permissions s-service=read” to display network service settings, and
“set permissions s-services=rw” to display and change network service
settings.
Syntax Change system-identifying information
set system [description=string|location=string|contact=string]
Display system-identifying information
set system
Options description=string
A description of this device. The maximum length is 64 characters. The
default is “”.
location=string
The location of this device. The maximum length is 64 characters. The
default is “”.
contact=string
The contact for this device. The maximum length is 64 characters. The
default is “”.
Examples Set description, contact, and location
#> set system description=”Engineering printer” location=”Room 1347”
contact=”John Doe at x-3749”
See also • "revert" on page 61.
• "show" on page 249.