User manual

set snmp
Chapter 2 Command Descriptions 199
authfailtrap={on|off}
Enables or disables the sending of authentication failure traps.
on
Enables the sending of authentication failure traps.
off
Disables the sending of authentication failure traps.
The default is “off.”
coldstarttrap={on|off}
Enables or disables the sending of cold start traps.
on
Enables the sending of cold start traps.
off
Disables the sending of cold start traps.
The default is “off.”
linkuptrap={on|off}
Enables or disables the sending of link up traps.
on
Enables the sending of link up traps.
off
Disables the sending of link up traps.
The default is “off.”
logintrap={on|off}
Enables or disables the sending of login traps.
on
Enables the sending of login traps.
off
Disables the sending of login traps.
The default is “off.”
Examples
Enable authentication failure traps
#> set snmp trapdestip=10.0.0.1 authfailtrap=on
Specify a new private community string
#> set snmp privatecommunity=”StLucia72!”
See also • "revert" on page 61.
• To disable and enable SNMP, use the “set service” command. See "set
service" on page 191.
• To disable and enable SNMP alarm traps, see "set alarm" on page 70.