User manual

set permissions
Chapter 2 Command Descriptions 163
s-user={none|read|rw}
Permissions for the “set user” command. (See "set user" on page 220.)
s-vpn={none|read|rw}
Permissions for the “set vpn” command. (See "set vpn" on page 228.)
s-wlan={none|read|rw}
Permissions for the “set wlan” command. (See "set wlan" on page 241.)
status={none|read|rw}
Permissions for the “status” command. (See "status" on page 254.)
telnet={none|execute}
Permissions for the “telnet,” “mode,” and “send” commands. (See "telnet"
on page 255, "mode" on page 50, and "send" on page 67.)
vpn={none|execute}
Permissions for the "vpn" command. (See "vpn" on page 256.)
who={none|execute}
Permissions for the “who” command. (See "who" on page 258.)
webui={none|execute}
Permissions for access to the Web user interface for a Digi Connect
device.
none
The user cannot use the Web user interface.
execute
The user can access the Web user interface.
Examples Set group permissions
#> set permissions type=group name=gurus newpass=rw-self s-user=read
Set user permissions
#> set permissions id=1 newpass=rw s-user=rw s-group=rw
See also • "User Models and User Permissions in Digi Connect Products" on page
14.
• "set user" on page 220.
• "set group" on page 115.
• "show" on page 249.