User manual

set permissions
162 Chapter 2 Command Descriptions
s-permissions={none|read|rw}
Permissions for the “set permissions” command itself.
s-pmodem={none|r-self|read|rw-self|w-self-r|rw}
Permissions for the “set pmodem” command. (See "set pmodem" on
page 164.)
s-ppp={none|read|rw}
Permissions for the “set pppoutbound” command. (See "set
pppoutbound" on page 166.)
s-profile={none|r-self|read|rw-self|w-self-r|rw}
Permissions for the “set profile” command. (See "set profile" on page
172.)
s-rciserial={none|read|rw}
Permissions for the “set rciserial” command. (See "set rciserial" on page
184.)
s-router={none|read|rw}
Permissions for the “set forwarding” and “set nat” commands. (See "set
forwarding" on page 109 and "set nat" on page 146.)
s-rtstoggle={none|r-self|read|rw-self|w-self-r|rw}
Permissions for the “set rtstoggle” command. (See "set rtstoggle" on
page 187.)
s-serial={none|r-self|read|rw-self|w-self-r|rw}
Permissions for the “set serial” and "set switches" commands. (See "set
serial" on page 189 and "set switches" on page 208.)
s-service={none|read|rw}
Permissions for the “set service” command. (See "set service" on page
191.)
s-snmp={none|read|rw}
Permissions for the “set snmp” command. (See "set snmp" on page 198.)
s-socket-tunnel={none|read|rw}
Permissions for the "set socket_tunnel" command. (See "set
socket_tunnel" on page 200.)
s-system={none|read|rw}
Permissions for the “set system” command. (See "set system" on page
211.)
s-tcpserial={none|r-self|read|rw-self|w-self-r|rw}
Permissions for the “set tcpserial” command. (See "set tcpserial" on page
212.)
s-term=s-term={none|read|rw}
Permissions for the “set term” command. (See "set term" on page 215.)
s-udpserial={none|r-self|read|rw-self|w-self-r|rw}
Permissions for the “set udpserial” command. (See "set udpserial" on
page 216.)