User manual

set permissions
Chapter 2 Command Descriptions 159
[who={none|execute}]
[webui={none|execute}
Display current permission settings
set permissions
Options Permission descriptions
Here are the user permissions and their effects on commands.
none
The command cannot be executed.
execute
The command can be executed.
r-self
The user can execute the "display" portions for both commands if the
user is logged in on the specified line.
read
The user can execute the "display" portions for both commands for
any line.
rw-self
The user can execute the "display" and "set" portions for both
commands if the user is logged in on the specified line.
w-self-r
The user can execute the "display" portions for both commands for
any line and the "set" portions for both commands if the user is logged
in on the specified line.
rw
The user can execute the "display" and "set" portions for both
commands for any line.
type={user|group}
Specifies whether the command applies to users or groups. This option
defaults to “user.”
id=range
Specifies the ID or the range of IDs of the users or groups to be acted on.
If omitted, the “name” option must be specified.
name=string
Specifies the name of the user or group to be acted on. If omitted, the “id”
option must be specified.
backup={none|execute}
Permissions for the “backup” command. (See "backup" on page 18.)
boot={none|execute}
Permissions for the “boot” command. (See "boot" on page 19.)
buffers={none|r-self|read|rw-self|w-self-r|rw}
Permissions for the “display buffers” and “set buffer” commands. (See
"display buffers" on page 37 and "set buffer" on page 90.)