User manual

set passthrough

156 Chapter 2 Command Descriptions

connectware={pass|terminate}

Specifies whether the Connectware Manager application is configured to

pass to the connected device (“pass”) or terminate at the Digi Cellular

Family device for purposes of managing it, known as a pinhole

(“terminate”). The default is "terminate."

surelink={pass|terminate}

Specifies whether the SureLink application is configured to pass to the

connected device (“pass”) or terminate at the Digi Cellular Family device

for purposes of managing it, known as a pinhole (“terminate”). The default

is "terminate."

ping={pass|terminate}

Specifies whether ICMP echo (ping) requests pass to the connected

device (“pass”) or terminate at the Digi Cellular Family device

(“terminate”). The default is “pass.”