User manual

set mgmtconnection
Chapter 2 Command Descriptions 137
set mgmtconnection
Devices
supported
This command is supported in all products except Digi Connect ES and
ConnectPort Display.
Purpose Configures or displays Connectware Manager server connection settings.
The Connectware Manager server allows devices to be configured and
managed from remote locations. These connection settings set up the
connection to the Connectware Manager server so the Digi device knows
how to connect to the server.
Required
permissions
For Digi Connect products with two or more users, to use this command,
permissions must be set to one of the following:
• For a user to display the Connectware Device Protocol connection
settings: “set permissions s-mgmtconnection=read”
• For a user to display and set Connectware Device Protocol connection
settings: “set permissions s-mgmtconnection=rw”
See "set permissions" on page 157 for details on setting user permissions
for commands.
Syntax Configure Connectware Manager server connection settings
set mgmtconnection [svraddr[1-8]=string]
[conntype={client|timed|serverinitiated}]
[connenabled={on|off}]
[timedperiod=period]
[timedoffset={immediate|oneperiod|randomtime}]
[lkaupdateenabled={on|off}]
[clntreconntimeout={none|timeout]
Display Connectware Manager server connection settings
set mgmtconnection
Options svraddr[1-8]=string
Used to specify one of eight possible Connectware Manager server
addresses. When the device server attempts to connect to a
Connectware Manager, it tries the server addresses in this list in the
order 1-8.
conntype={client|timed|serverinitiated}
Used to specify the connection type.
client
This is a client connection.
timed
This is a timed connection.
serverinitiated
This is a server-initiated connection.
connenabled={on|off}
Used to specify whether or not this instance is enabled for use.