User manual

set login
Chapter 2 Command Descriptions 131
set login
Device support This command is currently supported in all Digi Connect Family devices
except Digi Connect ES, Cellular Family products, and
ConnectPort Display.
Purpose Suppresses the user login for a Digi Connect device.
Required
permissions
For Digi Connect products with two or more users, to use this command,
permissions must be set to one of the following:
• For a user to display the login settings: “set permissions s-login=read”
• For a user to display and set login settings: “set permissions s-login=rw”
See "set permissions" on page 157 for details on setting user permissions
for commands.
Syntax set login [suppress={on|off}]
Options suppress={on|off}
Specifies whether the user login is suppressed for the Digi Connect
device.
on
Suppress login. The Digi Connect device uses the one-user model, as
described in "User Models and User Permissions in Digi Connect
Products" on page 14.
off
Do not suppress login. The Digi Connect device uses the two-user
model, as described in "User Models and User Permissions in Digi
Connect Products" on page 14.
See also • "revert" on page 61.
• "show" on page 249.
• "User Models and User Permissions in Digi Connect Products" on page
14.