User manual

set host
118 Chapter 2 Command Descriptions
set host
Device support This command is supported in all products.
Purpose Configures a name for the device, also known as a host name, or displays
the current host name for the device.
Required
permissions
For Digi Connect products with two or more users, permissions must be set
to “set permissions s-host=read” to display the current host name, and
“set permissions s-host=rw” to display and set the host name. See
"set permissions" on page 157 for details on setting user permissions for
commands.
Syntax Configure a host name for the device
set host name=name
Display the current host name
set host
Options name=name
The name for the device. The name can be up to 32 characters long, and
can contain any alphanumeric characters, and can also include the
underscore ( _ ) and hyphen ( -) characters.
See also • "show" on page 249.