User`s guide

Chapter 3
3-6 MIL-3000FTX Series of FastPort Print Servers
F
A
S
T
M
A
N
A
G
E
• Digi/MiLAN logo: Depending on the versions of MIL-
3000FTX, either a “MiLAN” or a “Digi” appears on the top,
right-hand side of the graphic. When this Logo is clicked
on, FastPort specifications appear. Change the Name,
Location, and Contact and press Set (Figure 3-5).
Figure 3-5. Digi/MiLAN Logo Message
• Parallel port: Depending on which button is clicked, this
parameter displays the status of the parallel port.
• Serial port: Depending on which button is clicked, this
parameter displays the status of the serial port.
• Device speed: This option is the RJ-45 portion of the
graphic (on the top, left-hand side of the unit. Figure 3-2).
When this hot spot is clicked on, this parameter displays
FastPort’s operating speed: Either 10 Mbps or 100 Mbps.