Specifications

Benhur Corporation – Multidyne, International Sales
95
Fiber Optics, Voice and Data Multiplexers:
Application Diagram for DVM3000 & DVM3000-MOD Video, Audio & Data Fiber Optic Transport System
FMX-125
Fiber Transport: USB, Data, Ethernet, Telecom
Data Channel Protocol (selectable in banks of 4 ch.) ………………..RS-232C, RS-422 or RS-485 Data
Data Configuration (RS422 mode supports RS485) …...................... Data Channels 0 & 1=RS422 I/O, 2 & 3=RS232 I/O; No termination.
Data Ch 0, 1 & 2=RS422 I/O, 3=RS422 In & RS232 Out; RS422 Termination ON.
Data Channels 0 thru 3=RS232 I/O; No termination.
Data Rate …………………………………………………………………..DC to 115.2 Kbps
Data and Audio I/O’s ……………………………………………………..44 pins D-Type Connector, Optional screw terminal adapter
Bit Error Rate ……………………………………………………………..< 1x10-9
Signal to noise ……………………………………………………………> 90 dB
Frequency response to 20 Hz to 20 KHz ……………………………..< +/- 0.1 dB
Distortion ………………………………………………………………….< 0.05%
Audio output level ………………………………………………………..Unity
Maximum input & output level, 600 Ohm ………………………………+18 dBm
Audio output impedance, balanced ………………………………………50 Ohms
Audio input impedance, balanced ………………………………………..600 Ohms or High
Power dissipation …………………………………………………………< 15 Watts, per unit
AC operation ………………………………………………………………110 or 220 VAC (optional 48VDC)
Operating temperature……………………………………………………. -40° to +75°C
Operating Humidity …………………………………………………………0-95% non-condensing
Wavelength …………………………………………………………………1310/1550nm
Output Power, minimum ………………………………………………….0 dBm Singlemode
Receiver Sensitivity ………………………………………………………..-24 dBm Singlemode
Optical Loss Budget, minimum ……………………………………………24 dBm Singlemode
Portable and Wall-mount: …………………………………………………7” L x 5 ¾” W x 1 ¾” H
Triple Rack-mount Kit for 3 modules (Part number -RMT): ……………7” L x 19” W x 1 ¾” H
UTIL-200-DVM 10 Slot Tray ………………………………………………13 ¾” L x 19” W x 3 ½” H
FMX-125-35
DATA Transceiver with 12 Channels of Bi-directional Data, 2 Channels of Bi-directional Audio, and 8 Channels of Relay or Tally Control, Singlemode
1310nm TX, 1550nm RX, -0 dBm, ST connector, Sensitivity –25 dB. (Requires FMX-125-53 & AD-125 Interface Adapter) (May require -RMT, -BLANK)
FMX-125-53
DATA Transceiver with 12 Channels of Bi-directional Data, 2 Channels of Bi-directional Audio, and 8 Channels of Relay or Tally Control, Singlemode
1550nm TX, 1310nm RX, -0 dBm, ST connector, Sensitivity –25 dB. ( Requires FMX-125-35) (Requires AD-125 Interface Adapter) (May require -RMT, -
BLANK)
-RMT Triple Rack-mount Kit (1 set )
-BLANK Blank panel for rack-mounting kit
AD-FMX-125 Break-out Adapter for FMX125 to Quick-release screw terminal connectors for 12 Bi-directional Data, 2 Audio Inputs, 2 Audio Outputs
and 8 Relay/Tally channels, 1 RU ( Requires 2 )