Specifications

Benhur Corporation – Multidyne, International Sales
83
DVI Single & Dual Link, Single Fiber, Transport System with Stereo
Audio and Data, DVI-5000
DVI-5000
Fiber Transport: RGB, VGA, DVI, HDMI, KVM
The NEW DVI-5000 Series provides a long haul, transport solution for high-quality, up to WQXGA 2560 x 1600, DVI Single
Link and Dual Link video sources via ONE fiber. The system also supports stereo audio and bi-directional data for monitor
control. The system uses No Compression with no user adjustments or calibration.
The DVI-5000 Series supports fully un-compressed, 100% transparent video transport. No frame dropping, every frame is
transported. The system provides a pixel-for-pixel image transport.
The video resolution is 100% 24 Bits for all scan rates with no contouring or bit reduction at high scan rates.
The design will support future 3 Gbps chip sets.
The DVI-5000 provides a total through put of up to 10 Gbps.
The system supports up to 2560 x 1600 pixels over ONE optical fiber without compression.
The system requires non-proprietary Singlemode fiber optic cable with a transport distance of up to 10 KM.
The DVI-5000 transmitter unit supports a loop-through input. The receiver provides two DVI outputs.
The system supports EDID from any monitor. The EDID support is selectable between the loop-through monitor or internal
generation on the transmit side.
The MultiDyne EOS Electro-optical Routing Switcher is the only Large Scale switcher on the market to switch DVI Single
Link and Dual Link. See the application diagram below showing a typical DVI switching application.