Specifications

Benhur Corporation – Multidyne, International Sales
72
DTV-235-FTX Serial Digital Video Singlemode Fiber Optic Transmitter and DA
DTV-235-FTX-50-FC
19.4Mbps or 143 - 540Mbps Serial Digital Video Fiber Optic Transmitter, 1310nm, -8dBm, Single-mode Laser -8 dBm with FC
connector, Modular for UTIL-200-FIBER and UTIL-200-DVM Trays.
Supports SMPTE 259M and SMPTE 310M. (-ST, -FC or SC for connector type)
DTV-235-FTX-52-FC
19.4Mbps or 143 - 540Mbps Serial Digital Video Fiber Optic Transmitter, 1300nm Single-mode Laser -3 dBm, FC conn.,
Modular for UTIL-200-FIBER and UTIL-200-DVM Trays.
DTV-235-FTX-53-FC
19.4Mbps or 143 - 540Mbps Serial Digital Video Fiber Optic Transmitter, 1300nm Single-mode Laser 0 dBm, FC conn.,
Modular for UTIL-200-FIBER and UTIL-200-DVM Trays.
19.4Mbps or 143 - 540Mbps Serial Digital Video Fiber Optic Transmitter, 1550nm Single-mode Laser 0 dBm, FC conn.,
Modular for UTIL-200-FIBER and UTIL-200-DVM Trays.
DTV-235-FTX-7-SC-XXXX 19.4Mbps or 143 - 540Mbps Serial Digital Video Fiber Optic Transmitter with CWDM 1270, 1290, 1310, 1330, 1350,
1370, 1390, 1410, 1430, 1450, 1470, 1490, 1510, 1530, 1550, 1570, 1590 or 1610nm Single-mode Laser 0 dBm with SC
connector. Supports up to 8 wavelengths or channels per fiber optic cable. Modular for UTIL-200-FIBER and UTIL-200-
DVM Trays. (Enter wavelength for xxxx) (May requires CWDM Mux & Demux Accessories)
DTV-235-FTX-6-FC
. One coaxial input, one Fiber Optic output.
. Economical solution for the transport of digital signals from 19.4
to 540 Mbps up to 100KM over Singlemode fiber optic cables.
. Available in 1300nm and 1550nm wavelengths.
. Laser failure and data present LED indicators with open collector
alarm output.
. Supports SMPTE 259M, SMPTE 305M, SMPTE310M, SMPTE
344M, M2S and DVB-ASI
Input:
Type: 1 BNC.
Impedance: 75 Ohms.
Return Loss:
>18dB up to 270MHz.
Fiber Output: Type: ST or FC.
Wavelength: 1310 or1550nm Singlemode.
Power: -8 to 0 dBm or CWDM Laser.
Specifications
Ordering Information:
DTV-235-FRX Serial Digital Video Fiber Optic Receiver and DA
. One Fiber Optic input and two coaxial outputs.
. Optical signal and data presence LED indicators with open collector alarm output.
. Used with the DTV-235-FTX.
Fiber Input:
Type: ST or FC.
Wavelength: 1100 to 1610nm.
Sensitivity: -28 dBm.
Output:
Type: 2 BNC.
Return loss: >18dB up to 270MHz.
DTV-225
DTV-235
Specifications
Ordering Information:
DTV-235-FRX-FC 19.4Mbps or 143 - 540Mbps Serial Digital Video Fiber Optic Receiver, 1100 to 1600nm, –25dBm sensitivity, Single-mode with
FC connector, Modular for UTIL-200-FIBER and UTIL-200-DVM Trays. Supports SMPTE 259M and SMPTE 310M.
(-ST, -FC or –SC for connector type)
Fiber Transport: HD-SDI, SDI, DV Firewire