Specifications

Benhur Corporation – Multidyne, International Sales
5
One Fiber Optic input and two coaxial outputs.
Used with the DTV-120-FTX.
Specifications:
Fiber Input: Type: ST or FC.
Wavelength: 1100 to 1600nm.
Sensitivity: -24 dBm typical.
Output: Type: 2 BNC.
Return loss: >18dB up to 270MHz.
One coaxial input, one Fiber Optic output.
Economical solution for the transport of digital signals up to
360 Mbps over Multimode fiber optic cables.
Up to a 10 dBm optical budget at a wavelength of 1310nm.
Supports SMPTE 259M Serial Digital Interfaces (SDI), 4:2:2
Component.
Specifications:
Input: Type: 1 BNC.
Impedance: 75 Ohms.
Return Loss: >18dB up to 270MHz.
Fiber Output: Type: ST.
Wavelength: 1330 Multimode,
Power: -14 dBm typical.
DTV-130-FTX
Serial Digital Video Singlemode Fiber Optic
Transmitter and DA
One coaxial input, one Fiber Optic output.
Economical solution for the transport of digital signals
from 143 to 400 Mbps up to 100KM over Singlemode
fiber optic cables Available in 1310nm and 1550nm
wavelengths.
.
Laser failure and data present LED indicators with
open collector alarm output.
Supports SMPTE 259M Serial Digital Interfaces
(SDI), 4:2:2 Component, Sonet/SDH and ATM.
Specifications:
Input: Type: 1 BNC.
Impedance: 75 Ohms.
Return Loss: >18dB up to 270MHz.
Fiber Output: Type: ST or FC.
Wavelength: 1310 or 1550nm Singlemode.
Power: -8 to 0 dBm or CWDM Laser.
DTV-130-FRX
Serial Digital Video Fiber
Optic Receiver and DA
One Fiber Optic input and two coaxial outputs.
Optical signal and data presence LED indicators
with open collector alarm output.
Used with the DTV-120-FTX.
Specifications:
Fiber Input: Type: ST or FC.
Wavelength: 1100 to 1600nm.
Sensitivity: -28 dBm.
Output: Type: 2 BNC.
Return loss: >18dB up to 270MHz.
DTV-120-FTX
Serial Digital Video
Multimode Fiber Optic Transmitter and DA
DTV-120-FRX
Serial Digital Video
Multimode Fiber Optic Receiver and DA
DTV-120
DTV-130
Fiber Transport: HD-SDI, SDI, DV Firewire