Specifications

Benhur Corporation – Multidyne, International Sales

DVM-1300

Exceeds the RS-250C Short-haul and Broadcast specification.

Specifications subject to change without notice. Designed and manufactured in the U. S. A.

Video Input _________________________________________________________________________________ 1 Vp-p

Signal to noise ______________________________________________________________________________> 75 dB

Differential gain ____________________________________________________________________________< +/- 2 %

Differential phase ___________________________________________________________________________ < +/- 1 °

Chrominance to luminance gain _______________________________________________________________ < +/- 1 %

Chrominance to luminance delay ___________________________________________________________ < +/- 15 nsec.

Frequency response to 6 MHz _______________________________________________________________< +/- 0.5 dB

3 dB Bandwidth ______________________________________________________________________________ 8 MHz

Luminance non-linearity ________________________________________________________________________ < 1 %

Ringing __________________________________________________________________________________ < +/- 1 %

Tilt ______________________________________________________________________________________ < +/- 1 %

Video output & input impedance _______________________________________________________________ 75 Ohms

Differential video input option ____________________________________________________ 120 Ohms, part # -DIFFIN

Cable Equalizer, optional (3000 feet) ____________________________________________________ >30 dB @ 10 MHz

Portable and Wall-mount __________________________________________________________ 7” L x 5 ¾” W x 1 ¾” H

Triple Rack-mount Kit for 3 modules (Part number -RMT)__________________________________ 7” L x 19” W x 1 ¾” H

UTIL-200-DVM 10 Slot Tray______________________________________________________ 13 ¾” L x 19” W x 3 ½” H

Data Channel Protocol (selectable in banks of 4 ch.) ___________________________RS-232C, RS-422 or RS-485 Data

Data Configuration (RS422 mode supports RS485) ______________________________________________________

Data Channels 0 & 1=RS422 I/O, 2 & 3=RS232 I/O; No termination.

Data Ch 0, 1 & 2=RS422 I/O, 3=RS422 In & RS232 Out; RS422 Termination ON.

Data Channels 0 thru 3=RS232 I/O; No termination.

Data Rate _________________________________________________________________________ DC to 115.2 Kbps

Data and Audio I/O’s_______________________________ 44 pins D-Type Connector, Optional screw terminal adapter

Bit Error Rate ______________________________________________________________________________ < 1x10-9

Power dissipation __________________________________________________________________ < 15 Watts, per unit

AC operation __________________________________________________________ 110 or 220 VAC (optional 48VDC)

Operating temperature___________________________________________________________________ -40° to +75°C

Operating Humidity ______________________________________________________________ 0-95% non-condensing

Wavelength ___________________________________________________________________________ 1310/1550nm

Output Power, minimum _____________________________________________________________ 0 dBm Singlemode

Receiver Sensitivity_______________________________________________________________ -24 dBm Singlemode

Optical Loss Budget, minimum ______________________________________________________ 24 dBm Singlemode

Fiber Transport: 9Bit Video, Professional