Specifications
Benhur Corporation – Multidyne, International Sales
43
Video Performance
Signal to noise ...........................................> 64 dB
Differential gain..........................................< +/- 2 %
Differential phase.......................................< +/- 1
Chrominance to luminance gain................< +/- 2%
Chrominance to luminance delay..............< +/- 30 nsec.
Frequency response to 6 MHz...................< +/- 1 dB
3 dB Bandwidth............................................8 MHz
Luminance non-linearity.............................< 2 %
Ringing ......................................................< +/- 2 %
Tilt..............................................................< +/- 0.5 %
Video output & input impedance ..................75 Ohms
Delay, throughput.........................................1.24 micro sec.
Data channels.............................3 RS-232C@ 9600 Baud
Audio Performance
Signal to noise........................................................... > 90 dB
Frequency response to 20 Hz to 20 KHz.................. < +/- 0.1 dB
Distortion................................................................... < 0.05 %
Audio output level, adjustable.................................... Unity, +/- 6 dBm
Maximum input & output level, 600 Ohm................... +18 dBm
Audio output impedance, balanced ........................... 50 Ohms
Audio input impedance, balanced (selectable) .......... 600 Ohms or High
Power dissipation ...................................................... < 15 Watts, per unit
AC operation ............................................................. 110 or 220VAC (opt
Operating temperature .............................................. 0 to +50 C
Storage temperature.................................................. -40 to +95 C
Portable and Wall-mount:.......................................... 7” L x 5 ¾” W x 1 ¾”
Triple Rack-mount Kit for 3 modules:…………………7” L x 19” W x 1 ¾”
Fiber Optics, Professional Multiplexers, 9 Bit Video, 24 Bit Audio and Data, Stand-alone, Multimode: (SIN 58-6)
DVM-1000-FTX-2
9 bit Video, 2 Channels of 24 bit Audio and 3 Channels of RS232 Data, Fiber Optic Transmitter with 1310nm Multimode LED -14 dBm with ST connector.
(May require -DVMAUDIO20, -DVMXLR20, -RMT, -BLANK and -WALL)
DVM-1000-FRX-2
9 bit Video, 2 Channels of 24 bit Audio and 3 Channels of RS232 Data, Fiber Optic Receiver, Multimode PIN with ST connectors, Sensitivity -24 dBm. (May
require –DVMAUDIO20, -DVMXLR20, -RMT, -BLANK and -WALL)
Fiber Optics, Professional Multiplexers, 9 Bit Video, 24 Bit Audio and Data, Stand-alone, Singlemode: (SIN 58-6)
DVM-1000-FTX-50
9 bit Video, 2 Channels of 24 bit Audio and 3 Channels of RS232 Data, Fiber Optic Transmitter with 1310nm Single-mode Laser -8 dBm with FC connector
(May require -DVMAUDIO20, -DVMXLR20, -RMT, -BLANK and -WALL)
DVM-1000-FTX-52
9 bit Video, 2 Channels of 24 bit Audio and 3 Channels of RS232 Data, Fiber Optic Transmitter with 1310nm Single-mode Laser -3 dBm with FC connecto
(May require -DVMAUDIO20, -DVMXLR20, -RMT, -BLANK and -WALL)
DVM-1000-FTX-53
9 bit Video, 2 Channels of 24 bit Audio and 3 Channels of RS232 Data, Fiber Optic Transmitter with 1310nm Single-mode Laser +0 dBm with FC connecto
(May require -DVMAUDIO20, -DVMXLR20, -RMT, -BLANK and -WALL)
DVM-1000-FTX-6
9 bit Video, 2 Channels of 24 bit Audio and 3 Channels of RS232 Data, Fiber Optic Transmitter with 1550nm Single-mode Laser +0 dBm with FC connecto
(May require -DVMAUDIO20, -DVMXLR20, -RMT, -BLANK and -WALL)
DVM-1000-FTX-7-xxxx
9 bit Video, 2 Channels of 24 bit Audio and 3 Channels of RS232 Data, Fiber Optic Transmitter with CWDM 1270, 1290, 1310, 1330, 1350, 1370, 1390, 14
1430, 1450, 1470, 1490, 1510, 1530, 1550, 1570, 1590 or 1610nm Single-mode Laser –0 dBm with SC connector. Supports up to 8 wavelengths or chann
per fiber optic cable. (Enter wavelength for xxxx) (May require -DVMAUDIO20, -DVMXLR20, -RMT, -BLANK and -WALL) (May requires CWDM Mux & Dem
Accessories)
DVM-1000-FRX-50
9 bit Video, 2 Channels of 24 bit Audio and 3 Channels of RS232 Data, Fiber Optic Receiver, Singlemode PIN with FC connectors, Sensitivity -28 dBm. (M
require -DVMAUDIO20, -DVMXLR20, -RMT, -BLANK and -WALL)
Accessories (SIN 58-6)
-RMT Triple Rack-mount Kit (1 kit)
-BLANK Blank panel for rack-mounting kit
-WALL Wall-mount Kit (1 set )
-DVMAUDIO20 Audio screw terminal break-out adapter for DVM1000
-DVMXLR20 XLR Audio Adapter Cable for DVM1000
-NOAUDIO No Audio Option, price adjustment for units without the 2 audio channels (subtract $200 per transmitter or receiver)
DVM-1000
Fiber Transport: 9Bit Video, Professional