Specifications

Benhur Corporation – Multidyne, International Sales
23
10 Bit NTSC Test Signal Generator, Modular Card
Four Channel, Video Automatic Bypass and Signal Change-over Switch,
switches to secondary source when primary source fails, 4 Channels, Modular Card
Automatically monitor 4 video channels.
If the video signal goes off the air or if the video circuit is
inactive, an alternate video signal is switched onto the line
automatically.
The system uses sync recognition and is not fooled by white
noise of off air signals.
Ideal for Satellite, Microwave, Off-air Antenna and Cable TV
Head-end applications.
If you loose a video feed, automatically put up an emergency
message or alternate video signal.
Automatically test continuity and performance of video feeds.
Switch a test signal and character ID onto the circuit when
there is a problem or when it is not in use.
The unit features front panel LED status indicators and high
impedance loop-through input for the secondary or test signal
input.
The user can loop the secondary inputs of several cards
together.
The unit offers low loss switching using RF relays.
Program video will loop-through upon power failure.
The modular design is compatible with the MULTIDYNE
UTIL-200 and the Grass 8500/8800/8900 trays.
Specifications
The TS12-CARD, Modular 10 Bit NTSC Test Signal Generator offers 16 precision test signals, 5 dedicated black
burst outputs, character source ID, APL settings, bounce and stereo audio tone in a modular card for the
MULTIDYNE UTIL-200 and the Grass Valley
TM 8500/8800 Modular Trays.
Include SMPTE Color Bars, Multiburst, Multipulse, Cable 5 MHz Sweep, Cable (SIN X)/X, NTC-7 Composite and
Combination plus many others.
Video/Audio Lip-sync Signal and vertical interval test signals (VITS), which are fully compatible with the TEK
TM
VM700ATM.
:
Input
Nominal Levels Video: 1 Vp-p
Return loss: >40 dB
Output
Video Level: 1 Vp-p
Source termination: 75 Ohms
Video
Frequency ( DC to 5MHz ): +/-0.05 dB
Power consumption, MAX: <2 Watts
TS12-CARD
AB-200
TS-12-CARD
AB-200
CG-200
Test Signal & ID Generators
Video Character ID and Audio Sweep Generator, Modular Card
The CG-200 Video Character ID Generator inserts a character message over video;
manual bypass from program to an alternate video source;
16+ page battery-backed memory;
6 lines with 15 characters;
30 character Vertical Interval ID;
motion bar;
alarm output; 2
0 to 20 KHz Audio Sweep and plugs into the MULTIDYNE UTIL-200 and the Grass Valley
TM 8500/8800
Modular Trays.
The CG-200 is ideal for identifying video feeds and audio feeds.
CG-200