Specifications

Benhur Corporation – Multidyne, International Sales
134
XLR Adapter Panels for DA’s, Switchers
Audio Breakout Panels
AEA-1
Adapt the audio 37 pin D-type connector of the MULTIDYNE VAS-1000, Grass Valley TEN XL", Performer SD" and many
other industry standard Routing Switchers to XLR connectors. The 10 balanced audio inputs and audio output are
converted to 11 XLR connectors.
The MEC-10X3 10 by 3 XLR Audio Break-out Panel is used to bridge the audio inputs of 3 or more MULTIDYNE VAS-1000
or compatible routing switcher for a 10 by 3+ matrix. The panel system supports up to 3 channels of audio. The connections
are made using 9 ribbon cables. Multiple panels can be used to form 10 by 6, 10 by 9& switcher matrixes. The XLR Audio
Break-out Panels greatly simplify the installation and modification of audio routing systems. All the audio connections are
made with XLR terminated cables instead of soldering the audio wires into a tiny D-type connector.
AEA-1 Recessed mount (3”), Mono XLR Audio Interface Panel.
(1 required per switcher audio channel)
AEA-1-FLAT Flat mount, Mono XLR Audio Interface Panel.
(1 required per switcher audio channel)
MF-370 Male to Female Ribbon Cable. (1 required)
MEC 10X3 10 by 3 Audio Bridging Adapter Panel with 33 XLR
connectors.
MF-370 Male to Female Ribbon Cable. (9 required)
ORDERING INFORMATION:
XLR Audio Break-out Panel for the MULTIDYNE VAS-1000, Grass Valley TEN XL™ and Compatibles
AIA-8x8
XLR Audio Break-out Panel for the Full Line of Leitch Routing Swichers
Adapt the 25 pin D-connectors of the full line of Leitch Routing Switchers to XLR connectors using the MULTIDYNE AIA-
8X8 XLR Break-out Panel and two ribbon cables. Each adapter breaks out 8 audio inputs and 8 audio outputs into a one
rack-unit panel of 16 XLR connectors. The pin outs of all the Leitch routing Switchers are the same. The adapter panels will
work with a 8 by 1 up to a 64 by 64 routing switcher.
AIA-8X8 XLR Audio Break-out Panel for 8 inputs and 8 outputs. Requires 2 MM-300 Ribbon Cables.
ORDERING INFORMATION:
Additional XLR Break-out Panel Systems
Adapt the audio screw terminals of the Grass Valley™ TEN 20™ or 20 TEN™ Compact Routing System to XLR connectors.
- Model AIA-2010
.
Adapt the audio screw terminals of the Grass Valley 8550 and 8560
Audio Distribution Trays to XLR connectors.
- Models AIA-8550 and AIA-8560
.
Adapt the audio screw terminals of the Videotek™ Omni Frame™
Audio Distribution Trays to XLR connectors. The interface is neatly
accomplished using ribbon cables to adapt the screw terminals or
D-Type connectors to a panel housing XLR connectors.
- Models AIA-8550 and AIA-8560
.
Adapt the audio screw terminals of the Leitch™ FR-883 and FR-884
Audio Distribution Trays to XLR connectors. The interface is neatly
accomplished using ribbon cables to adapt the screw terminals or D-Type connectors to a panel housing XLR connectors.
-Model AIA-880
.
AIA-8550 for Audio Interface Adapter Panel, rack-mount XLR chassis (requires 1)
DAI-8550 for DA Interface Board, screw terminal to ribbon cable adapter (requires 8)
MM-250 for Male to Male Ribbon Cable (requires 8)
Available for the 20 TEN™ Routing Switcher.
ORDERING INFORMATION: