Specifications

Benhur Corporation – Multidyne, International Sales
128
10 Bit Series of NTSC Test Signal Generators
•
10 bit digital video test signal generation exceeding the RS-250C Short-haul specification.
•
12 NTSC video test signal including 5 MHz Line Sweep, NTC-7 Composite, NTC-7 Combination, Multiburst,
Multipulse and (SIN X)/X.
• 95 to 100 IRE RAMP to measure Signal-to-Noise (S/N) and Signal-to-Quantizing Noise (S/Q) in digital video systems
as recommended by ANSI standard T1Q1.5/91-205R2. Ideal for Digital Video Fiber Optics and DS-3 Telephone
Compressed Video systems. Option -RAMP
• Vertical interval test signals (VITS), NTC-7 Composite and NTC-7 Combination, VM700ATM compatible.
Option -VITS
• Loop-through of external video and stereo audio.
• Automatic By-pass of external video and stereo audio. When using the Automatic By-pass feature external
video and stereo audio are looped through the device. If the external video is interrupted or lost, a video test
signal, character ID and stereo tone are switched onto the line automatically. Option -AB
• 16 message, field programmable character generator. Each message is 32 characters and is retained in a
battery-backed RAM for up to 10 years. Option -M
• Insertion of a vertical interval character ID into external video.
• Stereo audio tone, 3 frequencies, XLR or quick release screw terminal connectors.
• Lip-sync, audio and video synchronizing signal.
• 2 outputs, test signal output and Black Burst output.
• 12 hour DC operations with 4 AA batteries, external 6-20 VDC or 115VAC with external wall-mount supply
for the TS12-10B only. 115 and 230 VAC operation for the TS12-10B-RM only.
• Automatically maintain and trouble shoot video and audio circuits to RS-250C specifications.
• Ideal for Digital and Analog Fiber Optics, Distance Learning, Microwave, Cable TV, Broadcast TV and ENG.
Test Signal & ID Generators
TS-12-10B
TS12-10B STANDARD TEST SIGNAL SET
12 Transmission and Alignment Test Signals: SMPTE Color Bars, Cross Hatch,
Red Field, (SIN X)/X, NTC-7 Composite, Gated Pulse and Bar, Modulated Stair
Step, 5 MHz Line Sweep, NTC-7 Combination, Multipulse, FCC Multiburst and a
matrix of Color Bars, Multiburst and NTC-7 Composite.
TS12-10B-RM STANDARD TEST SIGNAL SET
12 Transmission and Alignment Test Signals: SMPTE Color Bars, Cross Hatch,
Red Field, FCC Multiburst, NTC-7 Combination, NTC-7 Composite, 5 MHz Line
Sweep, Multipulse, Modulated Stair Step, Black Burst, (SIN X)/X and a matrix of
Color Bars, Multiburst and NTC-7 Composite.
TS-12-10B and TS-12-10B-RM rear view