Specifications

Benhur Corporation – Multidyne, International Sales
113
SUMMARY
- Scalable matrix sizes from 32 by 32 up to 288 by 288 ports
- Switches digital signals up to 4.25 Gb/s
- Full duplex switching capacity up to 612 Gb/s
- Hot-pluggable SFP transceivers on all port cards
- Port cards, power supplies and fans are hot-swappablefor maximum flexibility
- GUI software allows user to build configurations by dragging and dropping ports
- Provides point -to-point, multiple loops, and multicast topologies simultaneously
Introduction
Capabilities
Our EOS-4000 switch is a versatile, multi- EOS configuration commands are sent via a
purpose, non-blocking, transparent switch that provides 10/100 Ethernet connection using a simple intuitive
high-speed switching between ports with minimal effect on command set. With regard to network testing, some of the
overall network latency. The EOS4000 series is capable of most significant capabilities are:
switching digital signals up to 4.25 Gbps with any of its 288
ports, all in a compact sizes from 1 RU up to 9 RU chassis.
Automatic and Remote Reconfiguration and
Fault Emulation.
The EOS-4000 is designed to accept up to
three modular port cards with up to forty-eight Small Form-
Factor Pluggable (SFP) transceiver modules per port card.
Each SFP transceiver module provides the physical ports
for one input-output pair. Different types of SFP
transceivers support a variety of network configurations:
Quickly establish links, emulate optical power break
with and without path failures, make topology changes,
and re-route point-to-point, loop, or multicast
connections.
Dynamic Device Testing
Through out-of-band control the switch can simulate
• 2.5, 2.125, 1.25 and 1.0625 Gb/s link rates available now
with 4.25 Gb/s transceivers coming soon
• 850, 1300 and 1550nm optical media
• HSSDC2 copper media
faults; also, the capability exists to identify improperly
operating devices.
Increased Resource Sharing Capabilities
• Links up to 50 kilometer
The EOS-4000 comes equipped with hot-
swappable power supplies, fans and port cards to allow
Switched connectivity between local or remote—up to
100 km—facilities and between devices allows testing
without physically moving equipment.
Cable and Hardware Diagnostics
users to quickly replace parts without affecting system
investigateperformance. A CompactFlash module acts as
the unit’s disk drive for the controller’s CPU and is capable
of being swapped out as well. The EOS-4000’s controlling
software and non-volatile configuration data resides on the
module.
Quickly isolate interconnect problems; investigate
whether the network can provide reliable data transfer
over specified distances without touching cables; and
test hardware configurations such as hubs.
Routing Switchers : Fiber Optic
EOS-4000 FIBER OPTIC SWITCHER
EOS-4000