Specifications

Digi m10 Hardware Reference v 1.20

Page 7 of 36

About This Manual

This manual defines and specifies the functions of the Digi m10 and its usage. It also contains

guidelines for using the development board which comes with the Digi m10 JumpStart Kit.

Target Audience

The target audience for this user manual comprises engineers and business managers who want

to augment their company's existing asset-tracking systems with satellite networks. A typical user

would be an engineer who is well- versed with wireless data communications.

Symbols Used in This Manual

Symbol Description

Provides additional information corresponding to the topic that is being discussed.

Warning! If ignored, may cause permanent damage to the development kit or injury

to a person.

Caution! Failure to comply with a caution may result in failure or damage to the

device.

Danger! Failure to comply with a danger symbol may result in serious injury.

Reference Documents

The following documents have been used in the preparation of this user manual.

 Department of Defense Test Method Standard for Environmental Engineering

Considerations and Laboratory Tests, MIL STD 810E

 European Telecommunications Standards Institute, EN 300 832 (A1 version 1.1.1),

Electromagnetic Compatibility for Mobile Earth Stations.

 International Electrotechnical Commission, IEC 1000-4-4, Testing and Measurement

Techniques -- Immunity to Fast Transient / Burst Immunity Test.

 International Electrotechnical Commission, IEC 61000-4-6, Testing and

Measurement Techniques -- Immunity to Conducted Disturbances, Induced by

Radio-Frequency Fields.

 ORBCOMM Serial Interface Specification, E80050015.

 ORBCOMM Subscriber Communicator (SC) Standards and Specifications,

E25050102.