Specifications

Digi m10 Hardware Reference v 1.20
Digi International, Inc. © 2009
Page 22 of 36
Figure 9: Digi m10 Dimensions
3.3.2 Mounting
The Digi m10 can be mounted directly to the host PCB using a board-to-board connector. The
Digi m10 has five solder legs, which must be soldered to the host controller’s common ground
reference plane. The host controller’s PCB needs to have five mounting holes to accommodate
the Digi m10.
The ground reference planes for the Digi m10’s connector and solder legs should be the
same as they are connected together within Digi m10