Specifications

Digi m10 Hardware Reference v 1.20

Page 15 of 36

Table 6: SA Pin

Pin Name Description

9 SA Satellite Available

Figure 7: Timing Diagram for Satellite Available

2.7 RF Interface

The RF connector for the Digi m10 (see Figure 8) is an MMCX plug, with an impedance of 50 Ω

nominal. Refer to

Table 7 for details.

Figure 8: RF Connector on the Digi m10

Table 7: RF Interface Details

Parameter Value

Transmit Power 5 W (37 + / -1 dBm)

TX Frequency 148 MHz to 150.05 MHz

RX Frequency 137 MHz to 138 MHz

VSWR < 2:1 preferred