Installation guide

S6 Installation Guide60
Installing Fill Panels
Fill Panels are available in metallic or acrylic finishes, and come in two sizes to fill small and large slots.
Fill Panel Large Same size as Fader Module for filling slot 1.
Fill Panel Small Same size as Process and Knob Modules for filling slots 2, 3, or 4.
To install Fill Panels:
 Unpack the Frame Panel packages, and install them to cover any empty slots. Fill Panels slide into place, just like modules.
Installing Display Modules
If your system includes Display Modules, install them next.
To install a Display Module:
1 Locate the four rounded mounting screws included with the Display Module that you unpacked when installing the mounting
brackets.
2 There are two positions to mount the Display Module, low and high. Select a position, then attach the Display Module to a Dis-
play Module Mounting Bracket and secure it with the included mounting screws.
To install the mounting brackets, see “Installing Display Module Mounting Brackets” on page 29
Fasteners, and Tools for Display Module
Fasteners
M4x10 BCHS
Tool
M2.5 Hex
Attaching a Display Module to its mounting bracket (side view)