Installation guide

Chapter 5: Installing the Power Strip, PSUs, Switches, and Cables 51
3 From the inside of the chassis, use four of the included flathead Phillips screws to secure the Side Cover to the frame as shown
in Figure 29.
4 Make sure power and Ethernet cables are not in the way, then take the right Side Cover and attach it to the right mounting plate
as shown in Figure 30.
Fasteners and Tools for the Side Covers
Fasteners
M4x14 FHPH
Tool
#2 Phillips
Figure 29. Securing the left Side Cover
Figure 30. Attaching the right Side Cover (Bolster not shown)
(Not to scale)