Installation guide

Chapter 4: Assembling Frame Chassis 23
6 Move the next chassis into position so that the right edge of its Chassis Bottom Plate sits on top of the left edge of the first chassis
as shown in Figure 17.
7 If your system includes a Leg Frame, attach the second chassis to the Beams and secure loosely using more of the Hex fasteners
included with the Beams as shown in Figure 16. Tighten them enough to hold the chassis in place, but do not tighten them fully.
8 Attach the right edge of the second chassis Bottom Plate to the left edge of the Side Wall of the first chassis using three #1 Phil-
lips screws as shown in Figure 18. Do not tighten the screws fully.
Figure 17. Attaching the first two chassis (top view, at left, and front view, at right)
Fasteners, and Tools for Chassis Bottom Plate to Side Wall
Fasteners
M3x6 SEMS (7760-30025-01)
Tool
#1 Phillips
Figure 18. Securing the Chassis Bottom Plate of the first chassis to the Side Wall of the second chassis
(Not to scale)