Installation guide

S6 Installation Guide22
3 Secure the Side Wall to the Back and Front Tie Plates using Hex fasteners.
4 If your system does not include Legs, proceed to Step 6.
5 If your system includes a Leg Frame, mount the first chassis on the Beams and secure it loosely to the right end shelf from un-
derneath using Hex fasteners (included with the Beams) as shown in Figure 16. Make sure the pins on the top of the Beams align
with and fit through the openings in the Chassis Bottom Plate. Do not tighten the fasteners yet.
Fasteners and Tools for Back and Front Tie Plates to Side Wall
Fasteners
M5x8 FHCS (7760-30553-00)
Tool
M3 Hex
Figure 15. Attaching the end Side Wall to the Back and Front Tie Plates
Fasteners, Washers, and Tools for Chassis to Beams
Fasteners
M6x14 Hex (SHCS)
Washers
M6
Tool
M5 Hex
Figure 16. Attaching the first chassis to the Beams of a Leg Frame
(Not to scale)
(Not to scale)