Installation guide

Chapter 3: Assembling Legs 17
Attaching the End Shelves
To attach the End Shelves:
 Using four fasteners and washers per side, attach the Left and Right End Shelves to the Legs as shown in Figure 6.
Leveling the Leg Frame
To level the back legs:
 Use the 13 mm open end wrench (included with the Legs) and adjust the back leveling feet (see Figure 7). When looking down
at the feet from above, turn the wrench clockwise to raise or counterclockwise to lower.
Fasteners, Washers, and Tools for End Shelves
Fastener
M5x15
Washer
M5
Tool
M4 Hex
Figure 6. Attaching the Left End Shelf (Right End Shelf shown attached)
Figure 7. Back Leg Leveler
(Not to scale)