Installation guide

S6 Installation Guide16
Attaching the Back Corner Brackets
To attach the Back Corner Brackets:
1 Attach the Back Corner Brackets as shown in Figure 5 using four fasteners and washers (included) per bracket. Align the pins
on the brackets with the holes in the top of the Legs.
2 Fully tighten all fasteners installed in the previous steps to completely secure the Beams and Back Corner Mounting Brackets
to the Legs. Check to make sure the Beams sit flat on the top of the legs.
Fasteners, Washers, and Tools for Back Corner Brackets
Fastener
M5x15
Washer
M5
Tool
M4 Hex
Figure 5. Attaching the Back Corner Brackets
(Not to scale)