User`s guide

88
LCD
ConnectPort LTS has an LCD display and you can configure it on this page. The LCD configuration
page has
 Enable display: If checked, LCD display is enabled and you can use LCD menu using keypad.
− Background image wait time: Specifies how much user idle time must elapse before the
background image is launched on the LCD display. Default is 0 means the background
image will not be launched automatically.
 Use default background image: If checked, default background image will be launched on the
LCD display when either the wait time is elapsed or the Exit menu is selected using keypad on
the LCD display.
 Load background image: Used to upload user defined background image on ConnectPort LTS.
This product supports only 128 x 64 8 bit bitmap image. If incorrect type of image is uploaded,
error message will be displayed on LCD screen. After uploading user image, the Enable
display or Use default background image option should be toggled once to force the LCD
daemon to reload the image.
 Load custom (python) program: Used for uploading Python programs onto the ConnectPort
LTS.
 For detailed instructions for configuring an IP address using the LCD interface, please see
“LCD interface: configuration, monitoring, and diagnostics” on page 131.