User`s guide

 Samba Settings :

− Enable: Enable or disable the Samba service.

− Samba server name: IP address or DNS name of the Samba server.

− Mounting on path Samba server: Full path name of mounting point on the Samba server.

− Samba timeout: Interval in seconds before disconnecting Samba connection when the

Samba server is not responding.

− Samba mount retrying interval: Interval in seconds when Samba remounting is tried after

disconnecting the Samba connection.

− Alert Settings

- Description: Description for this alert which will be sent to receiver.

- Send E-mail alert to the following recipients for Samba disconnection: Send e-

mail alert if checked.

− Subject: Title of E-mail alert.

− To: Recipient of E-mail alert.

− CC: Secondary Recipient of E-mail Alert.

− Send Samba disconnection trap when alarm occurs: Send an SNMP trap if checked.

 SYSLOG settings :

− Enable: Enable or disable the SYSLOG service.

− SYSLOG server name: IP address or DNS name of the SYSLOG server.

− SYSLOG facility: Facility level of SYSLOG message.