User`s guide

57
Advanced Network Services Settings
The Advanced Network Services page shows a set of specific network services that are available for
ConnectPort LTS products, and the related settings for the service.
 Web Settings:
− Login timeout: Idle timeout settings for Web server.
 SMTP Settings:
− Enable: Enable or disable the SMTP server
− SMTP server name: IP address or DNS name of the SMTP server.
− SMTP with authentication: Choose this option if your SMTP server can be accessed after
authentication.
− SMTP without authentication: Choose this option if your SMTP server can be accessed
without authentication.
− POP before SMTP: Choose this option if your SMTP server can be accessed after
successful login to POP service.
− SMTP user name: The user name of your SMTP (or POP) server.
− SMTP password: The password of your SMTP (or POP) server.
− Device mail address: Mail address that will be used as a mail sender.
 NFS Settings:
− Enable: Enable or disable the NFS service.
− NFS server name: IP address or DNS name of the NFS server.
− Mounting path on NFS server: Full path name of mounting point on the NFS server.
− NFS timeout: Interval in seconds before disconnecting NFS connection when the NFS
server is not responding.
− NFS mount retrying interval: Interval in seconds when NFS remounting is tried after
disconnecting NFS connection.
− Alert Settings
- Description: Description for this alert that will be sent to the receiver.
- Send E-mail alert to the following recipients for NFS disconnection: Send an
E-mail alert if checked.
- Subject: Title of E-mail alert.
- To: Recipient of E-mail alert.
- CC: Secondary Recipient of E-mail alert.
− Send NFS disconnection trap when alarm occurs: Send an SNMP trap if checked.