User`s guide

29
Command-line interface (CLI)-based client connections
Command-line interface based client connections are available for use once a user has established a
session with the ConnectPort LTS product CLI. CLI-based client connections include:
 telnet: A connection is made to a remote entity using the Telnet protocol.
 bash: The “bash” command provides access to the Linux bash shell.
 rlogin: A connection is made to a remote entity using the Rlogin protocol.
 connect: Begin communicating with a local serial port.
Modem emulation (pseudo-modem) client connections
When a port is in the modem-emulation or pseudo-modem mode, it can initiate network connections
based on AT command strings received on the serial port. The AT commands for modem emulation
are documented in the ConnectPort LTS Command Reference.