User`s guide

143
5. Choose Firmware upgrade by entering 3. The following screen is displayed.
6. Enter the information for the first menu items.
- Protocol: The choices are BOOTP or TFTP.
- IP address assigned: Enter the IP address of the Digi ConnectPort LTS unit.
- Server’s IP address: The IP address of the BOOTP or TFTP server.
- Firmware File Name: The filename for the firmware.
- Ethernet interface: 1 or 2.
7. Use the ESC key to return to earlier menu screens.
8. Select Start firmware upgrade. The firmware upgrade can take 15 to 20 minutes to process.
Please leave the ConnectPort LTS unit alone until the firmware update is complete.
9. When the upgrade process is complete, the device will reboot and the factory default settings
will be restored.