User`s guide

135
After changing the selected letter, you can choose another letter by pressing Ext key twice. Repeat
the steps to change the letter as described above. When done changing the letters as desired, press
the Ext key on the following screen:
You can then enter the IP settings menu again. Continue to change SUBNET MASK or
GATEWAY in the manner described above.
After completing the settings changes, press the Ext key on the IP SETTINGS menu. Then choose
one of following options:
 SAVE APPLY: Save configuration changed and apply them to the ConnectPort LTS product.
 DISCARD CHANGES: Discard all changes.
 CANCEL: Go back to IP SETTINGS menu.