User`s guide

132
Keypad operations
When you turn on the ConnectPort LTS, the following default image is displayed on the LCD
screen:
Pressing any key displays the main menu screen on the LCD screen.
The black triangle on the right end of each menu item indicates the menu item has submenus. If you
press Sel key again, the following configuration submenu screen is displayed on the LCD screen.
On this screen, the CONFIG message on the top left side indicates you are on the configuration
menu. The MAIN message on the top right side indicates the upper menu is the main menu. (To go
o the upper menu, press Ext on this screen.)
Pressing the Dn key causes IP SETTINGS #2 to be selected as follows: